INDe - Cymbal Arm w/BR2XL bracket

Allow 2-4 weeks for delivery of products from Independent Drum Lab.

About this Bundle

With this bundle you get the INDe Drums Ultralight Cymbal Arm along with a BR2XL mounting bracket to hold the cymbal arm. The bracket can either replace your old bracket in its existing holes, eliminating the need to drill any additional holes in your drum shell, or be installed from new.

Included with this Bundle

The following is included with the bundle:

• Ultralight Cymbal Arm
  1x Cymbal arm measuring 12, 14, 16 or 18 inches.
  1x Memory Lock
  1x Gearless multi-clamp
  1x Cymbal Rod with cymbal gummi)
• BR2XL bracket
  1x BR2XL Mounting Bracket

About the Cymbal Arm itself

INDe Drums Ultralight Cymbal Arms features a light 10.5mm aluminum L-arm with INDe's gearless multi-clamp tilter and a cymbal rod.

Available in four standard lengths - 16, 18, 20 and 22 inches (measured from the centerline of the L-Arm base to the cymbal location - see below), these arms offer great versatility in setup.

The measured length indicates the maximum reach, allowing for flexible positioning.

About the BR2XL Bracket (and which model to choose)

The BR2XL bracket is available in two different versions: BR2XL and BR2. The difference is the space between the mounting screws, so it is rather important that you measure the distance, before you order.

The BR2 bracket has a hole spacing between 2,54 to 5,08 cm (1 - 2 inches).
The BR2XL bracket has a hole spaceing between 5,08 - 8,13 cm (2 - 3,2 inches).

If you need the bundle with the shorte BR2 bracket - click here!