Ahead Switch Kick - Vintage Boomer

About Vintage Boomer

If you want the completely soft, big bass drum beater for that vintage sound with the Switch Kick system, then the Vintage Boomer is the one you should get hold of. The head is made of felt, which is then covered with a thick layer of white fleece.

Note
The Vintage Boomer requires an adapter shaft to mount on the pedal. This adapter shaft can either be purchased separately here, or as part of the "starter kit" - Switch Kick Two Way bass drum stick - which can be purchased here.

What is Switch Kick?

Switch Kick is a different type of bass drum beater. On the Switch Kick system, you can change the beater head itself in a few seconds, which also opens up the possibility of adapting your bass drum sound to the individual track you play - just like you do with your drumsticks, rods and whiskers.

The system is made up of two parts:

• The fixed adapter shaft
• A beater head - according to your own wishes

There are a number of different beater heads for the system - all with the aim of giving you different tonal possibilities.

How to change the beater in less than 5 seconds

It is easy to change the beater with Switch Kick - so easy in fact, that it can be done in under 5 seconds!

How to remove the beater

1. Grab the beater head
2. Turn a quarter turn
3. Pull the beater head up - and off

How to mount the beater

1. Grab the beater head you want
2. Push the beater down over the shaft
3. Turn a quarter turn

Video-demo: Switch Kick

In the video below you can see Jared Falk from Drumeo demonstrating the Switch Kick system.